Hall-research AD-340 Manuel d'utilisateur télécharger pdf (Page 10)

Model AD-340

3.2.2 Operation

For most installations, the AD-340 can be configured fully from the Front Panel

Push Buttons.

If needed, the GUI software has full access to all the capabilities of the Audio

Delay system that are not available from the device front panel controls.

The table below summarizes the control differences between the device controls

and the software.

The AD-340 Audio Delay automatically configures as a HID (Human Interface

Device) and does not require any USB drivers installed by the end-user.

When the AD-340 is attached to a valid USB port, the Windows™ system will

automatically detect and identify the appropriate USB driver. There may be a

short delay while this process occurs.

This detection and driver installation only occurs when the AD-340 is connected

for the first time. Afterwards, any time a previously connected AD-340 is again

connected to the PC; it will be silently configured by the system.

Notes:

• The software scans the AD-340 settings at a rate of 10 times per

second to provide quick response times to the user.

• The GUI software on-screen fields are disabled until a valid AD-340

device is attached to the system.

• Only one instance of the program can run at a time.

Attempting to execute the application more than once

will result in an error message.

Feature Front Panel Software

Power  

Input Type  

Delay Type  

Delay Value Adjustment  

Sampling Rate 

Temperature Compensation 

Audio Gain 

Error Indication 

Bitstream Indication 

Digital Mute 

Analog Mute 

Front Panel Lock 

Auto Mute 

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Hall-research AD-340 Manuel d'utilisateur Page 10