Hall-research UHCOM-WP Manuel d'utilisateur télécharger pdf (Page 5)

UHBX Wall Plates

The wall plate can also be used with the lower cost UH-1BTX-R (max

distance 100 meters) or the economical UH-1BT-R (max distance 70 meters),

however since these do not provide power, a compatible PoH inserter is

required (Hall Research part number 511-POH-17W).

4.2 Connection Block Diagrams

Following are typical ways to configure the extension system.

4.2.1 Recommended Connection Scheme

The UHBX-R-PSE receiver is recommended for use with the HDMI wall

plate sender. It is a compact box with only a single 5v power supply. It

complies with the required PoH handshake and only injects power on to the

UTP cable after detecting a compliant device on the other end.

The UHBX-R-PSE receiver also features a user settable switch for activating

“Long Reach” mode in order to support distances in excess of 100 meters (to

150 m). It also provides RS-232 and IR connectors to allow adding extension

of control signals (see section 5.2).

4.2.1 Alternate Connection Scheme

It is possible to use the lower cost receivers UH-1BTX-R (max distance 100

meters) or the economical UH-1BT-R (max distance 70 meters), however

since these do not provide power, a PoH inserter is required (Model 511-

POH-17W).

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Hall-research UHCOM-WP Manuel d'utilisateur Page 5